|
[ Up ] [ NEW XPLS II III & IV ] [ XPLS Series ] [ M9 Persona Small Full Range ESL ] [ Model 2.1 ] [ ESL Electronics ] [ Model-1 ] [ Model-3.1 ] [ ESL Building ] [ Measurements ] [ ELS Schematics ]
DISCONTINUED
Click on thumbnail to enlarge
use the
back arrow on your browser to return
Sound
Panel Radiating area 16in.x48in. over 1500 sq. in. pair
Shown
Model-3.1 Electrostatic Panel in Hard Oak Frame
The new Model-3.1 adds
new standards reproducing sound performances so accurately and
indistinguishably. With such low distortion and the Focused Image Geometry™ (FIG)
precisely tracks the input signal flawlessly. Made from the proven technology of
our best selling Model-2 ESL but twenty-five percent larger electrostatic panels
The Model-3
low distortion with FIG and line source combine to provide minimal room
interaction, detail, clarity, and power that can equal the most expensive
world-class competitors. The Model-3.1 is 21 inches wide making it an outstanding
speaker for larger rooms or dedicated home theaters systems. The Model-3.1 is
available in oak, and optional other hardwoods, maple, and cherry.
| Specifications |
|
|
Frequency response |
45
Hz resonate to ultrasonic |
|
Audio power (min/max) |
35/200 watts rms |
|
Radiating area |
1500
total square inches pair |
|
Horizontal dispersion |
Focused Image Geometry (FIG) |
|
Vertical dispersion |
Projected field height of speakers |
|
Impedance |
6 ohms (nominal) 1.75 ohms minimum @12kHz |
|
Sensitivity |
Equivalent to 85dB/1w/1m,
measured at 1.25 meters |
|
Stators |
Electrostatic speakers panels are
completely assembled, and tested,
stators are made from 16 gauge(.06-in.) cold rolled steel, powder coated with a special triple coating process |
|
Height x Width x Depth |
56 in. x
21 in. x 7/8 in. |
|
Weight |
65
lbs. per set |
| Includes |
Model-2.1 bias supply, crossover, custom wound step-up transformer, oak frames
T-legs |
| US
Retail price |
$2295 |
| Internet
direct price |
$1595 per pair |
|
